Fire Systems Search for information on Fire Systems
Your home for radio fire alarms, force protection systems, personnel alerting and Addressable fire alarm panels
Email us with your Fire Systems question
Vulcan I Fire Alarm Control Panel Ordering Information

Vulcan I Fire Alarm Control Panel
Ordering Information
Part Number Description
VULCAN I FIRE ALARM CONTROL PANEL

The Vulcan I Fire Alarm Control Panel is an F.M. Approved low voltage panel designed for use in local, auxiliary, remote station or proprietary signaling systems. Some of the Vulcan I's more prominent features include:

  • Class A or B operation
  • Expansion capability up to 13 Class A or 26 Class B zones
  • Two Class B bell circuits standard; one Class A bell circuit optional
  • Form C auxiliary alarm and trouble contacts
  • Lamp Test, Alarm Test, Trouble Silence, Alarm Silence, and Reset Switches
  • Power, Panel Trouble, Ground Fault LEDs and Alarm and Trouble LEDs for each zone
  • Built-in transient protection
  • 700-026-00 Vulcan I Fire Alarm Control Panel, 24 Vdc, One Class A or Two Class B Zones, 15" x 18" x 3" Surface-Mount Enclosure. Not expandable in this enclosure.
    700-026-01 Vulcan I Fire Alarm Control Panel, 24 Vdc, One Class A or Two Class B Zones, 15" x 14" x 3" Flush-Mount Enclosure. Not expandable in this enclosure.
    700-027-00 Vulcan I Fire Alarm Control Panel, 24 Vdc, One Class A or Two Class B Zones, 28" x 18" x 3.6" Surface-Mount Enclosure. Expandable in this enclosure to seven Class A or fourteen Class B zones.
    700-027-01 Vulcan I Fire Alarm Control Panel, 24 Vdc, One Class A or Two Class B Zones, 28" x 18" x 3.6" Flush-Mount Enclosure. Expandable in this enclosure to seven Class A or fourteen Class B zones.
    700-028-00 Vulcan I Fire Alarm Control Panel, 24 Vdc, One Class A or Two Class B Zones, 40" x 18" x 3.6" Surface-Mount Enclosure. Expandable in this enclosure to thirteen Class A or twenty-six Class B zones.
    700-028-01 Vulcan I Fire Alarm Control Panel, 24 Vdc, One Class A or Two Class B Zones, 40" x 18" x 3.6" Flush-Mount Enclosure. Expandable in this enclosure to thirteen Class A or twenty-six Class B zones.
    176-133-00 Zone Expansion Module, 24 Vdc, Two Class A or Four Class B Zones (or combination) per Module
    VULCAN I FIRE ALARM CONTROL PANEL OPTIONS
    ZONE OPTIONS
    175-047-00 Vulcan I Four-Zone Alarm Interface Module, 24 Vdc. For connecting Two Class A or Four Class B Zone Alarm outputs to the BT2 Building Transceiver. This Alarm Interface Module allows the user to send in alarm by zone signals.
    790-026-00 Vulcan I Zone Expansion Module and Four Zone Alarm/Trouble Interface Kit, 24 Vdc. For expanding the Vulcan I Fire Alarm Control Panel by Two Class A or Four Class B Zones and for connecting Two Class A or Four Class B Zone Alarm and Trouble outputs to the BT2 Building Transceiver.
    176-181-01 Vulcan I Verification Module Kit. This module allows all zones on Zone Expansion Modules AFTER the Verification Module to be verified before they are indicated and reported.
    BELL CIRCUIT OPTIONS
    790-027-00 Vulcan I Class A Bell Circuit Module. This module is mounted in the Vulcan I Fire Alarm Control Panel. It converts one Class B bell circuit into a Class A bell circuit. (Two modules required to convert both Class B bell circuits to Class A circuits.)
    AUXILIARY SWITCH OPTIONS
    790-022-00 Vulcan I Drill Switch. This switch can be held in the DRILL position to turn on the indicating appliances on the circuit without placing the control panel in the alarm condition.
    790-023-00 Vulcan I HVAC Disconnect Switch. This switch is used to prevent shutdown of air handling systems, exhaust fans, door and elevator controls, etc. during control panel testing or maintenance. While the signaling circuit is disconnected, a panel trouble condition exists.
    790-024-00 Vulcan I BT2 Transmitter Disconnect Switch. This switch is used to prevent transmission of alarms and troubles to the D-700/D-500 Plus during control panel testing or maintenance. A panel trouble exists while the loop is disconnected.
    POWER SUPPLY OPTIONS
    081-056-00 Battery Enclosure Assembly, 18"H x 12"W x 6"D Enclosure; Includes two 12 Vdc, 26 AH Batteries
    404-703-00 Remote Power Supply, 6 Amp power supply and battery charger. Capable of charging 7.7 amp hour batteries (ordered separately).


    Contact Monaco's Customer Service Department for design assistance and pricing information at (509) 926-6277.



    © Monaco Enterprises, 2010. All Rights Reserved.