Closed Circuit TV Accessories The Power Supply provides 24 Vac output for 4, 8, or 16 cameras. The Camera Switcher manually or automatically switches eight cameras to one or two monitors. Camera Power Supply Camera Switcher   Camera Power Supply Features 5 A capacity Outputs 8 cameras Circuit breaker protection 120 Vac or 230 Vac selectable input 24 Vac output or 28 Vac output for longer wire runs ac power indicator with Power On/Off switch Description This power supplies provide 24 Vac output for 4, 8, or 16 cameras. To compensate for voltage losses over long wire runs, 28 VAC outputs also are available. The power supplies have a selectable input of 120 or 230 VAC and are packaged in an easy-to-install metal enclosure that has ample room for wiring connections and conduit entries. This power supply is protected by a circuit breaker, which will self-reset when the fault is corrected, eliminating the need for replacing fuses. Ordering Information Part Number   Description 192-841-00   Power supply for cameras   Camera Switcher Features 120 Vac input 8 inputs (terminating or looping) Dual outputs Alarm inputs Supports NTSC and PAL video Camera ID (up to 20 characters) and external trigger   Description The switcher manually or automatically switches eight cameras to one or two monitors. If an alarm occurs, the switcher automatically locks and directs the input to the currently selected monitor. When an alarm is cleared, the unit will return to its previously operating dynamic state. Multiple alarms sequence at a 1 second dwell time. The switcher includes an external trigger and camera ID. Camera dwell time can be set individually or globally for all cameras. The dwell time is adjustable from 1 to 60 seconds, in one second increments. In addition, the terminating inputs that can be easily converted to looping inputs via jumpers on the mother board. Monitor output for camera ID is also changeable via jumpers on the mother board. The switcher is configured for use in a standard 19-inch EIA rack; rack ears can be removed for desktop applications.   Ordering Information Part Number   Description 192-432-00   Camera switcher