Integrated Access Control One-Door Reader Interface Module Four-Door Reader Interface Module Proximity Card/ID Card System One-Door Reader Interface Module Features Local database for up 20,000 cards, 7000 events Supports one or two readers (with or without keypad) Four Supervised inputs Onboard strike relay, and up four external relays Multiple cards formats / facility codes Real-time clock Flash memory for easy firmware upgrades Surface-mount technology Description The AIM-1SL uses the latest technology to provide the ultimate reader interface. The local database stores up to 20,000 cardholder records, providing complete access control capabilities even if the interface is off-line. Storage of up to 7,000 events when off-line insures that historical records of off-line activity will be maintained. The RS-485 interface circuitry of the AIM-1SL is located on a separate, small, field replaceable, module providing repair of the communications circuitry without removing the entire interface. The AIM-1SL has terminations for connection of one or two Wiegand interface readers complete with 3 LED lines (Red, Yellow, Green) and a buzzer control line. The interface may be configured to use entry/exit readers for anti-passback configurations or to use a single reader with a push-button input for exit (REX). Each reader may also be equipped with a keypad for use in a high security Card plus PIN mode or the user friendly Card or PIN mode (entry allowed without using a badge). The AIM-1SL has a built-in 2 A strike relay for direct control of the door locking device. It also provides an output for connection of up to four ADA-11, external, high security, relay modules. The relays may be added as required. The functions provided are high security strike output, local alarm annunciation, and 2 general purpose programmable Aux outputs. The installer has the choice of using the onboard strike relay or adding the external ADA-11 relay for increased security. The AIM-1SL also has terminations for the door contact input, exit push button, and one or two auxiliary (general purpose) alarm inputs. These inputs are all Grade "A" supervised for increased security. The supervision may be disabled when not required via a dip-switch. The AIM-1SL supports all major reader technologies including magnetic stripe, proximity, fingerprint, hand geometry, barcode, long range infrared, and others. Many of these reader types are available with integral keypads. The AIM-1SL works with the ADA-11 door strike/relay module to prevent door entry though tampering with wires. The door will not open until the AIM 1SL directs it to. Ordering Information Part Number Description 803-118-00 AIM-1SL one-door interface reader module 803-120-00 ADA-11 digital door strike control/strike relay module with selectable address   Four-Door Reader Interface Module Features Supports 4 integrated card reader/keypads Monitors position of 4 doors Monitors 4 request to exit push buttons Monitors 4 AUX inputs (alarms) Controls 4 door strike relay outputs Controls 4 auxiliary relay outputs 8 relays included on module/12 inputs Accepts Wiegand inputs from readers/keypads Supports 3 access modes on loss of communications: locked, unlocked, facility code Low power +12 to +24 Vdc (250mA) or 18Vac Multi-dropped 2/4-wire RS-485 operation 7.5" x 5.5" (190.5mm x 140mm) Installs within UPS/power supply enclosure P/N 404-087-00 Description The AIM-4 provides a complete 4-door reader interface for access control. It interfaces to 4 card readers, 4 keypads, or 4 card readers with keypad. In addition, it monitors door position, exit push button, auxiliary alarm input, and Wiegand input (Data 0, Data 1) from each door reader. It controls all 4 electric strikes and provides 4 auxiliary outputs. This totals 12 inputs and 8 outputs. The following card reader technologies are supported by the AIM-4: magnetic stripe (swipe or insert), Wiegand, proximity cards, proximity vehicle tags, biometric devices, bar code, infrared and long range infrared. Each AIM-4 provides a unique device address and can be multi-dropped with other AIM-4s on the 2-wire or 4 wire RS-485 communications line. The AIM-4 operates from regulated +12 to 24 Vdc or 18 Vac. Quick disconnect connectors provide easy installation and support. The AIM-4 supports locked/unlocked or facility code access modes in case communications with the BT-X is interrupted. The AIM-4 fits within a power supply/UPS enclosure that provides 12 V 8 A/ 5 V 1 A regulated uninterruptible power supply, a battery charger, and a 12V/12 Ah battery. The output voltage distributor provides 8 outputs - each with a power on LED and solid state circuit breaker in a 16 inch x 16 inch x 5 inch enclosure. The AIM-4 works with the ADA-11 door strike/relay module to prevent door entry though tampering with wires. The door will not open until the AIM 4 directs it to. Ordering Information Part Number Description 803-119-00 AIM-4 four-door reader interface module 404-087-00 Power Supply/UPS within enclosure 803-120-00 ADA-11 digital door strike control/strike relay module with selectable address Proximity Card/ID Card System Features Complete proximity card/ID card system with computer, 17 inch color monitor, color card printer, color ink jet printer, digital camera and associated memory sticks/case, and tripod Card printer prints on both sides of ID cards P/N 803-128-00 and proximity cards P/N 803-123-00 with full color graphics Pentium III 933 mHz computer with at least 512 megabytes of SDRAM, 20 gb hard drive, and a read/writable CD ROM drive Software installed on the computer allows design and creation of ID cards: captures photographs, signatures, and fingerprints; maintains a secure database of cardholder information HP 2200 SE ink jet printer: 1200 x 600 dpi Digital camera with 2048 x 1536 pixel resolution and 128 megabyte memory sticks that are placed in special 3.5 inch floppy disks. Includes case for memory stick. 3.5 inch floppy disk interface for memory sticks and USB adaptor for transferring the images to the computer Lightweight tripod Description The proximity card/id card system provides a means of creating your own proximity cards and id cards, each complete with a photograph of the person, signature, thumbprint, other user-defined personnel information. The system includes a pentium-class computer with a 17-inch monitor and a color ink jet printer, color card printer, digital camera with 128 megabyte memory cards that fit into the provided 3.5 inch floppy disks, and lightweight tripod. The software allows you to create a database of personnel information through an easy-to-use graphical user interface. Images are easily imported with the help of wizard-driven utility. Extensive user documentation is provided to help you with any questions you may have as you create your cards. Industrial-strength security is provided for the database. Ordering Information Part Number    Description 192-851-00    Proximity card/id card system with computer, 17 inch monitor, ink jet printer, card printer, digital camera, and tripod. Order cards separately 803-123-00    Blank proximity access card used with P/N 192-851-00 803-128-00    Blank ID card used with P/N 192-851-00